Skip to content

Webcam photo booth. Filters, countdown, photo strips.

Camera is off, press Start camera below.
camera off

Your camera stays on your device, nothing is recorded, stored remotely, or sent anywhere.

Photo-strip & export options

Shown under the strip, e.g. “Photo booth · 10 Jun 2026”.

Gallery

No photos yet, start the camera and hit Take photo.

Why a browser photo booth?

Most “free” photo booth apps upload your camera feed or watermark your shots. This tool uses your browser’s built-in getUserMedia and Canvas APIs, so every frame is processed on your own machine, private, install-free, and free forever. Choose a live filter, set a countdown, shoot a single frame or a burst that composes into a classic photo strip, then download as JPG or PNG. No account, nothing uploaded.

§ · written guide

How to use the Webcam Photo Booth

This photo booth takes pictures and photo strips with your webcam. Your browser shows the live camera feed, applies the filter you pick, and draws each shot onto a canvas you can download as PNG or JPG. Burst mode takes several shots in a row and stacks them into one strip with an optional caption. It is for profile pictures, quick team photos, parties and fun at your desk.

Step by step

  1. Start the camera

    Press Start camera and allow camera access when your browser asks. The line beside the buttons shows the size the camera is really sending, such as actual: 1280 × 720. Press Stop camera to turn it off.

  2. Pick a camera and resolution

    If you have more than one camera, choose it from the Camera list. Choose 640 × 480, 1280 × 720 (the default) or 1920 × 1080 under Resolution (requested). The camera restarts on any change, and it may send a different size if it cannot match the request.

  3. Set the look and the timer

    Choose a Live filter: None, Black & white, Sepia, Vintage, Vivid, Cool or Warm. Set Filter strength from 10% to 100%. Set the Countdown to Off, 3 seconds (the default), 5 seconds or 10 seconds.

  4. Choose mirroring and flash

    Mirror preview flips the live view like a mirror. Mirror captured photo too saves the photo flipped the same way; untick it so text behind you reads the right way around. It only applies while Mirror preview is on. Shutter flash effect flashes the camera view white at each shot. All three are on by default.

  5. Take a photo or a strip

    For one picture, keep Single shot and press Take photo. For a strip, choose Burst → strip, set Shots to 3, 4 or 6 and the Gap between them to 0.5s, 1s or 2s, then press Start burst. Tick Keep individual shots too to get each frame as well as the strip.

  6. Style the strip and download

    Under the strip options, pick a Strip background (Classic white, Black, Moss green or Cream). Caption on strip prints the text in the box below it, Photo booth to start with, at the foot of the strip; untick it for no caption. Leave Add date to caption ticked to add the date after the text. Set JPG quality from 50% to 100% (92% by default). In the Gallery, press PNG or JPG on a card to save it, Delete to remove it, or Clear all to empty the gallery.

Reading the result

  • Each gallery card is named photo-booth followed by a number for single shots, or photo-strip followed by a number for strips, and the download uses the same name, for example photo-booth-1.jpg.
  • The size under each picture is the saved size in pixels. Single shots match the camera's actual size; a strip is the width of one shot plus a border, and as tall as all the shots stacked with gaps and the caption.
  • The countdown runs once before the first shot. In burst mode the counter then shows 1 / 4, 2 / 4 and so on as each frame is taken.
  • If a message says the browser cannot bake that filter into the file, the photo was saved without the filter. In that browser only Black & white and Sepia can be saved into the image.

Tips and common mistakes

  • If the camera does not start, check the camera icon in the address bar and allow access, close any other app that is using the camera, then press Try again.
  • For the sharpest photos, pick 1920 × 1080 and check the actual size line. If it shows less than you asked for, that is usually the most your camera can send.
  • Use PNG for the best quality and JPG for a smaller file to share. Lower JPG quality makes smaller files but shows blocky patches sooner.
  • Download the shots you want before you leave. The gallery is not saved, so closing or reloading the tab clears it.

Privacy and limits

The camera feed is shown and captured by your own browser. Nothing is recorded, uploaded or saved by the page, and the camera is switched off when you press Stop camera or leave the page. Camera access needs your permission and a secure https page, and the tool needs a browser that supports camera access, such as a current Chrome, Edge, Firefox or Safari.

Back to the tool

§ 02 · what you can do

Everything a photo booth should do.

  • Take instant webcam photos with a single click, no app to install.
  • Shoot 3-, 4- or 6-shot photo strips in burst mode, assembled automatically into one image.
  • Apply live filters, black & white, sepia, vintage, vivid, cool or warm, with adjustable strength.
  • Set a countdown timer of 3, 5 or 10 seconds so you have time to pose.
  • Mirror or un-mirror the preview and the captured photo independently.
  • Download photos as JPG or PNG with a custom quality setting, all saved locally, nothing uploaded.
§ 04 · faq

Frequently asked questions.

Is the Webcam Photo Booth free?
Yes, completely free for everyone. No sign-up, no account and no usage limits.
Is it private? Is my camera feed uploaded anywhere?
No upload, ever. The booth runs entirely in your browser using the getUserMedia and Canvas APIs, your camera feed is processed on your own device and never leaves your computer.
Do I need to install anything or create an account?
No, just open the page, click Start camera and allow access. No installation and no account are required.
Why won’t my camera start?
Camera access needs a secure context (https or localhost) and your permission. If you blocked it, click the camera icon in your browser’s address bar to allow access, then press Try again. If the camera is used by another app, close that app first.
What’s the difference between single shot and burst strip?
Single shot captures one photo. Burst mode takes several photos in a row with a chosen gap between them and stacks them into a classic vertical photo strip with an optional caption and date, and can keep the individual frames too.
Are my photos saved when I close the tab?
The gallery lives in memory only, so it clears when you close or reload the tab. Download any photos you want to keep as JPG or PNG, they save straight to your device.

Published · Last updated .

Priya sent you a message Online now

Talk to a Developer Now

Share your name and email to reply.

Reply